Operation & Maintenance Manual
──
LG946L Wheel Loader
16
be dangerous.
z
Examine the condition of the ground and the quality of the soil in the work area, and
determine the proper method of operation. Before starting work, the ground should be
planed and pressed firmly. If there is a lot of sand and dust, sprinkle with water first.
z
When working on public roads, there should be a trained person managing the traffic. Erect
the barricades and use the sign of
DON’T ENTER
to ensure safety of passing traffic and
pedestrians.
z
In the places where objects are buried such as water pipes, gas pipes, or high-voltage cables,
contact the responsible companies to confirm the position of the buried objects and take care
not to damage them during operations.
z
When working in water,
swampland or passing a sand bank, check the ground conditions,
speed and depth of the water. Be sure not to exceed the permitted water depth. After working,
check and clean the positions where lubricant is needed. Please refer to
CHAPTER II–6
CIRCUMSTANCES REQUIREMENT
for the depth of water for passage
.
z
Be sure there are good ventilation conditions when working in a closed environment.
4.1.2 Check before Starting the Engine
z
Check the machine carefully before starting work. Report to the manager if there is any
abnormal condition. Operate only after the abnormal conditions are resolved.
z
To avoid fire, check whether there are any flammable materials such as wood chips, leaves
and paper which have accumulated on the engine.
z
Check whether there is leakage of oil, or water, loose nuts, abnormal sounds, broken or lost
parts.
z
Check the cab floor, rearview mirror, control lever (or control handle), pedal and handrails
for oil, grease, snow or dirt, and clean.
z
Check the level of coolant, fuel and make sure the level of engine oil in the pan is normal.
Please refer to
CHAPTER III – 3.6 Supply of Oils,
to check whether the air filter is
blocked.
z
Adjust the operator’s seat to the proper position for operation. Please refer to
CHAPTER
III – 1.2.9 Seat Adjustment
,
to check whether the safety belt and the fixed equipment
(if assembled) are broken.
The safety belt must be replaced with a new one
every three years.
z
Check the gauges for damage, and make sure the control lever (or control handle) is in the
braking position.
