Operation & Maintenance Manual
──
LG946L Wheel Loader
17
z
Clean the dirt on the cab window and all the lamps to ensure better visibility.
z
Adjust the rear-view mirror and keep the surface clean to ensure the best view from the
operator’s seat. Replace with a new one if the mirror has been damaged.
z
Don’t leave any tool or part around the operator’s seat. They may fall because of the
vibration during moving and working, which could break the control lever (or control handle)
or switch, or move the control lever (or control handle) which could start the working
equipment and cause an accident.
z
Check whether the floodlight and signal light is normal and repair if not.
z
Check whether the front and rear frames is unlocked.
z
Clean oil from the handrail and the pedal and the silt and sand from the shoes to avoid
slippage, which may affect the operations.
z
Check whether the tires are worn or broken, the bolts and nuts are loose. Especially pay
attention to the loose hub nut and repair or replace for any abnormal situations.
4.1.3 When Starting the Engine
z
Before boarding on the machine, check the machine
again to see whether there are people or blockages on
or under or near the machine. If there are unrelated
people in the working area, ask them to leave. Do not
begin work until they leave.
z
Don’t start the machine if there is the tag of “
NO
OPERATION
” on the control handle of the working
equipment or shift control handle.
z
z
Sit with the safety belt locked into place (if assembled).
z
Know the meanings for all the warnings on the equipment,
meters, and control equipment on the panel.
z
Be sure the brake valve manual control handle (or the parking brake switch) is at the braking
position and all the control equipment are in the neutral position.
z
Sound the horn for warning.
z
Start the engine. Please refer to
CHAPTER III – 3.2.2 Starting of Engine
.
z
Only start the engine in the cab. Do not start the engine by short circuit. It may destroy the
