Version 1 .0
| 25
The depth at which the BOD probe enters the bottle to measure the dissolved oxygen is controlled within the racks themselves. ¨Pressing “Edit
Rack” in Figure 23 allow access to further modification of the racks as seen in Figure 24.
Figure 24. additional rack modification.
“dxt”,”dyt”
: Distance between the first and the last bottle within the rack along each axis. Increase or decrease values of if the probe(s) are
not place properly.
“Zd”
: Depth of probe when going into the bottle.
“ZP”
: Depth of probe when going into the wash station.
: Allows access to extended settings (decapping height, autofill sensor height, etc….)
Figure 25.
“Z Auto Fill”
: Depth of Auto Fill sensor when filling bottles. Increase to reduce fill level and lower to increase the fill level.
