Version 1 .0
| 23
6 .5 ADMIN-TOOlS TAB
Admin tools
is a tab where advanced parameters can be adjusted. This tab password proteced (
password= scp123
)
Figure 22. Screenshot of the admin-tools tab.
6.5.1 Robot
•
"
init x
": Individually initializes the X axis. The robotic arm moves the X axis to the home position.
•
"
init y
": Individually initializes the Y axis. The robotic arm moves the Y axis to the home position.
•
"
init Z
": Individually initializes the Z axis. The robotic arm moves the Z axis up to home position.
•
"
initiAliZAtion
": Initializes each axis sequentially starting with Z followed by Y and then X.
•
“Axis X”: Allow for direct displacement along the X axis, based upon the value given in mm.
•
“Axis Y”: Allow for direct displacement along the Y axis, based upon the value given in mm.
•
"Axis Z”: Allow for direct displacement along the Z axis (BOD probe and Autofill sensor), based upon the value given in mm.
•
"Axis Z2" : Allows for direct displacement along the Z2 axis (Decapper), based on the value given in mm.
