Assembly
12.00 | SWS | Assembly and Operating Manual | en | 389456
37
Ø
In the event that the cover plate (6) has to be removed:
Remove the cover plate (6) from the SWK (7).
IMPORTANT! Product may leak! When removing the cover
plate, ensure that the O-ring remains in the SWK
Ø
Insert dowel pin (5) into bore on cover plate / SWK.
Ø
Apply screw lock to screws (8).
Ø
Insert SWK (7) with dowel pin (5) into the bore in the adapter
plate.
Ø
Secure SWK (7) to adapter plate (3) with screws (8).
✓
Observe the tightening torque for the mounting screws.
Item Mounting
SWK 005
SWK 011
5
Alignment pin
Ø 3 x 8
Ø 3 x 10
8
Mounting screw according to
standard
M3 x 25,
DIN EN ISO 4762
Strength class
8.8
Max. tightening torque [Nm]
1.13
Threadlocker
Loctite ® 222
Mount adapter plate (shown as an example) to SWA, illustrated on SWA 011
Ø
Clean mounting surfaces on SWA (1) and adapter plate (2).
Ø
Insert the adapter plate (2) with two alignment pins and/or with
one alignment pin and the centering collar on the adapter
plate (4) into the holes provided for this purpose.
Ø
Fasten the adapter plate (2) to the SWA (1) with screws (3).
✓
Observe the tightening torque for the mounting screws.
Ø
Mount the end effector.
