Assembly
12.00 | SWS | Assembly and Operating Manual | en | 389456
39
Mount adapter plate (shown as an example) to SWA 007 (A = mounting from below;
B = mounting from above)
NOTE
If the axial pneumatic feed-throughs are to be used on SWA 007,
observe chapter
Ø
Clean mounting patterns on SWA (2) and adapter plate (4).
Ø
Insert the adapter plate (4) with two dowel pins (3) or one
dowel pin and a centering plate into the bores provided for this
purpose.
Ø
Secure the adapter plate (4) to the SWA (2) from above or
below with screws (1).
Ø
Mount the end effector.