SCHUNK SWS 005 Скачать руководство пользователя страница 51

Страница: 51 / 137

Assembly

12.00 | SWS | Assembly and Operating Manual | en | 389456

Mounting on robot for SWK 071

Clean the mounting patterns on the robot (1), adapter plate (3)
and SWK (7).

Insert dowel pin (2) into adapter plate (3).

Apply screw lock to screws (4).

Insert the adapter plate (3) with dowel pin (2) into the bore on
the robot.

Secure the adapter plate (3) to the robot (1) with screws (4).

✓

Observe the tightening torque for the mounting screws.

NOTE

Depending on the type of adapter plate (3), the SWK (7) is
mounted on the adapter plate with or without the cover plate (6).
If the adapter plate replaces the cover plate, the cover plate must
be removed.

In the event that the cover plate (6) has to be removed:

Loosen

screws (8) and remove cover plate (6) from the SWK (7).

IMPORTANT! Product may leak! When removing the cover
plate, ensure that the O-ring remains in the SWK

Insert dowel pins (5) into SWK (6).

Содержание SWS 005










































































































































Результаты поиска

Содержание SWS 005

Отзывы:

Похожие инструкции для SWS 005

Бренды по названию

Популярные бренды

SCHUNK SWS 005, Сборка и руководство по эксплуатации

Результаты поиска

Содержание SWS 005

Отзывы:

Похожие инструкции для SWS 005

Бренды по названию

Популярные бренды