Commissioning
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
31
6.2.1
MULTIPROG Installation
Insert the MULTIPROG CD in the drive of the PC. The AutoRun
function on the CD starts Internet Explorer. Now select
MULTIPROG
(version 4.0 here) and start installation (
Figure7:
Installation of MULTIPROG
Note
If a version of MULTIPROG below version 4 is already installed,
the installed version must not be overwritten if the old projects
are needed for further work.
MULTIPROG must then be installed on a new path. All other
installation settings can remain unchanged.
You are prompted to restart your computer when installation is
complete. A computer restart is not yet required if you want to now
install the ProConOS OPC server.
6.2.2
OPC Server Installation
To install the OPC server in Internet Explorer, select the
ProConOS
OPC server
and start installation (
The OPC server should be installed in the MULTIPROG directory. All
other installation settings can remain unchanged. A PC restart is
required after installation.