Other Operating Software
Operating Manual XCA 1100 / XCA 1200
●
Version 12/17
141
Notes!
Separate tool tip helps are available for some settings.
A “Routing” command for a “Programming PC” is issued for
“Computer name” in the tool-tips (mouse pointer on the
appropriate input field). Depending on the Home network
configuration, additional settings may be required.
"F2" can be used to load the default IP configuration (delivery
condition) or "F3" can be used to load the current IP configuration
into the input masks ("IP configuration")
Hotkey "F5" is used to support the proposed IP address scheme
(see above); "F5" automatically takes the last number of the host
IP address (e.g. 212) for assigning the host IP #2 or the target IP
address
Figure 130:
X Manager, IPConfiguration
When the Reboot checkbox
has been activated, the
restart is performed
automatically.
