15
Selecting the PDF 1.4 (compatible with Adobe Acrobat
®
Reader version 5.0 or
higher) option will create PDF 1.4 specific commands, such as “Transparency” and
may result in higher quality and smaller file sizes.
Selecting the PDF 1.5 (compatible with Adobe Acrobat
®
Reader version 6.0 or
higher) option will create PDF 1.5 specific commands, such as allowing you to use
the more efficient JPEG2000 compression and 128-bit encryption.
Optimized for Web Viewing
Choose this option to increase the viewing speed of your PDF documents on web
sites.
Font Embedding
ScanSoft PDF Create! lets you include fonts inside PDF documents. Font
embedding slows down PDF creation and increases file size, but it ensures
document layout and appearance are preserved, regardless of the fonts available on
a reader’s computer. Choose a standard control:
Embed Non-Standard Fonts (default)
Embed All Fonts
Do Not Embed Fonts.
The default embeds all fonts except the most common fonts that all computers
should have: typically Arial, Times New Roman, Courier and Symbol.
Click
Advanced
to see the settings for each standard control. To specify more
precise settings for a customized control, click
New
, name a new control, make the
desired settings and click OK.
To specify a list of fonts to be always embedded, de-select
Embed All Used Fonts
,
select
Always Embed Fonts
, select the desired fonts one-by-one and use the right-
facing arrow button to place them in the
Always Embed Fonts
panel.
To activate the arrow buttons select the checkbox next to them and select a font.
Click an arrow button to change its direction. This lets you add or remove fonts from
the lists.
To have all fonts embedded except fonts that you choose, select
Embed All Used
Fonts
, then select
Never Embed Fonts
; add or remove fonts until the desired ones
are listed and click OK.
Note:
Font files have a flag to allow or prohibit embedding. ScanSoft PDF Create!
respects this instruction.
Use
Delete
to delete a control. Use
Default
to return supplied controls to default
values and remove user-defined controls.