Chapter 3
Creating and modifying zones
47
4. Continue until all the zones are appropriately ordered.
If you do not number all the zones, they will be automatically
numbered when you select another tool or start OCR. Unless you
are using the True Page style set, the order of zones determines the
order in which text will be placed on a recognized page.
t
To add an area to a zone:
1. Click the Modify Zones tool in the Tools palette.
2. Position the mouse pointer inside the existing zone at one corner
of the area you want to add to the zone. (Point A in the example
below).
3. Hold down the mouse button and drag the mouse pointer to the
opposite corner of the area you want to add. (Point B in the
example).
4. Release the mouse button.
The reshaping zone you have defined (shown with a dotted line in
the example) does not appear, but the existing zone takes on its
new shape.
t
To subtract an area from a zone:
To remove an area from a zone, use the above procedure, but hold
down the Command key (
z
) as you draw the reshaping zone.
A
B
Resulting
reshaped zone
Zone to be reshaped
Reshaping zone
A
B
Resulting
reshaped
zone
Zone to be reshaped
Reshaping zone
Содержание OMNIPAGE PRO X
Страница 1: ......
