Chapter 3
Creating and modifying zones
45
You can draw up to 64 separate zones. Draw zones in the order
you want them processed. A number at the top left of each zone
indicates the reading order.
If you draw a zone over an existing one, the borders of the new
zone will wrap around the existing zone. The zones will not
overlap.
t
To draw an irregular zone:
1. Click the Polygon tool in the Tools palette. The mouse pointer
becomes a drawing tool in Image view.
2. Make sure no existing zones are selected.
3. Click the appropriate zone type in the Zone Info palette.
4. Position the drawing tool where you want to start drawing the first
side of the zone and click the mouse button once.
5. Move the drawing tool to form the first side of your zone.
6. Click the mouse button again when the dotted line has the desired
line length. The line becomes solid.
7. Draw a perpendicular line in either direction and then click to
form the next side of the zone.
8. Repeat step 7 to finish drawing each side of your zone.
9. Double-click to close the shape.
You will not be allowed to draw a line if it constitutes a restricted
shape. The following zone shapes are restricted:
If you draw an irregular zone when the zone type is set to Table, it will
change to Single Column Text. You cannot change the zone type of an
irregular zone to Table.
Indented along
the top
Indented along
the bottom
Hole in the
middle
Содержание OMNIPAGE PRO X
Страница 1: ......
