Savch S3100A Series, Руководство пользователя

Страница: 58 / 157

54
11 Fault and protection parameters

indicates that the parameters can be set during operation.
Parame
ter
Parameter function Setting range
Factory
setting
11-48
Fault protection action selection 2
Single digit:Reserved
Tens digital:EEPROM read write fault
0:Coast to stop
1:Stop according to the stop mode
hundreds digital:Reserved
thousands digital:Reserved
ten thousands digital:Operating time
arrival(same as 11-47 digits)
0

11-49
Fault protection action selection 3
Single digit:Reserved
Tens digital:Reserved
hundreds digital:Power-on time
arrival(same as 11-47 digits)
thousands digital:Lost load
0:Coast to stop
1:Stop according to the stop mode
2:Decelerate to 7% of the rated frequency
of the motor and continue to run. If the load
is not lost, it will automatically return to the
set frequency.
ten thousands digital:PID feedback lost
during operation(same as 11-47 digits)
0

11-50
Fault protection action selection 4 Reserved
0

11-54
Continue running frequency selection
in case of failure
0:Run at current operating frequency
1:Run at set frequency
2:Run at upper limit frequency
3:Run at the lower limit frequency
4:Run at abnormal standby frequency
0

11-55
Abnormal standby frequency
60.0%
～
100.0%
(100.0% corresponds to the maximum
frequency 00-03)
100.0%

11-56
Reserved
11-57
Reserved
11-58
Reserved
11-59
Instantaneous power failure action
selection
0:
Invalid
1:
Deceleration
2:
Decelerate to stop
0

11-60
Instantaneous power failure action
pause judgment voltage
80
～
100.0% 85%

11-61
Judgment time of instantaneous
power failure voltage rise
0.0s
～
100.0s 0.5s
