115
10 PID Control Parameters
PID control is a common method of process control. By performing proportional, integral, and differential
operations on the difference between the controlled variable feedback signal and the target signal, and by
adjusting the output frequency of the inverter, a closed-loop system is formed to stabilize the controlled variable at
Target value. It is suitable for process control occasions such as flow control, pressure control and temperature
control. Figure 5-25 shows the principle block diagram of the process PID control.
P
Td*s+1
PID output
Target
Feedback
+
-
1
1 1
Ti S
（
（
Figure 5-25 Principle block diagram of PID control
10-00
PID given source
Factory setting
0
Setting range
0
10-01 Setting
1
AVI1
2
AVI2/ACI
3
Reserved
4
PULSE setting (MI5)
5
Communication setting
6
Multi-step speed command given
10-01
PID data given
Factory setting
50.0%
Setting range 0.0%
～
100.0%
This parameter is used to select the given channel for the target quantity of the process PID.
The process PID setting target value is a relative value, and the setting range is 0.0%~100.0%. Similarly, the
feedback quantity of PID is also a relative quantity. The role of PID is to make these two relative quantities the
same.
10-02
PID feedback source
Factory setting
0
Setting range
0
AVI1
1
AVI2/ACI
2
Reserved
3
AVI1
－
AVI2/ACI
4
PULSE setting (MI5)
5
Communication setting
Содержание S3100A Series
