78_
SmartViewer
SmartViewer
M
Add dynamic IPs in the following cases:
- If the Ethernet uses the DHCP protocol
- If using xDSL (However, this is not applicable if using a static IP)
Option
•
Port : You must change the port number if the DVR fails to
connect due to such as fire wall.
•
Idle Time : This is specified to find out which client has an
abnormal network connection status.
If the network is not restored normally within the idle time, the
DVR will terminate the connection with the client. The default
is 3 minutes. (0~3600 sec)
•
Bandwidth Limit : If you check this option, the traffic of data
transfer to the smart viewer or web viewer will be limited to a
specific value.
M
If you change the network settings, the DVR will regain connection
automatically.
Network Stream
•
Resolution : You can select a video resolution that will be used
in data transfer via the network.
•
Frame Rate : It indicates frames per second. Select one
between 0 fps and 30 fps.
•
Quality : For a video in 1080p, you can select one between
Q1 and Q7.
For a video in 720p, you can select one between Q1 and Q5.
System Log
Used to check the system log.
