38_
menu setup
menu setup
•
Input Res : Display the input resolution.
•
Rec. Res : Display the recording resolution.
•
F(FPS) : FPS stands for frames per second. You can specify FPS between 0 and 30fps. The maximum frame
rate can differ depending on your setting.
When mixed with 720p and 1080p setups, 1 frame of 1080p is estimated as 2 frames of 720p. (In DVR
menu, frame allocation should satisfy this limit and cannot set to a value that exceeds the maximum
performance.) For example, if two channels are set to 720p at 30 frames, rest of the channels can be
allocated with 1080p at 30 frames or 720p at 60 frames.
•
Q(Quality) : For 1080p, you can select a recording quality between Q1 and Q7. For 720p, you can select a
recording quality between Q1 and Q5. It is recommended to select Q3 or more for event recording.
The higher the quality is, the shorter the recording time becomes. So set it to Q1 if you want to reduce the recording size.
M
If you set the frame rate to 0fps in program setup, the remaining 30fps cannot be used for other channels. This is because
even if you set the frame rate to 0fps, at least 2~3fps will be reserved for a reason such as network transfer. Therefore, if
you want to use the remaining 30fps for other channel, you must set the channel to <
Disable
> in the channel setup.
EVENT SETUP
Event Setting
Specify the event application time and dwell time.
MENU - ► - ► - ► - ENTER - ENTER
•
Event Detection : Specify the application method for event recoding.
- Always : The DVR always recognizes the event while in operation.
- Schedule : Recognize and respond to an event that occurs at a specific time.
The <
Schedule
> item will be created on the bottom. Select that to display the setup window.
- Off : This will disable the event recording.
•
Event Screen/Dwell time : Specify the duration to display the channel where an event took place.
•
Event Source : Select an event source to use for the popup window. The event source contains three options
: sensor, motion detection and text.
•
Event Action : Select one from relay 1~4, buzzer, e-mail and FTP.
M
If events occur in multiple channels simultaneously, the screen will be split in as many as the channel count.
For instance, if events occur in 3 channels, the screen will be split in 4 to display the individual event. To return to the
previous screen, press [
ESC
].
