NovaChat User’s Guide
80
Enabling Speech and Symbols in ChatEditor
When you install ChatEditor, messages similar to the following will be
displayed:
You must attach a PCS-configured NovaChat Device to enable and display PCS Symbols.
Click OK to continue.
Speech is currently disabled.
Please connect a NovaChat/ChatFusion device to this computer to enable speech.
Choose
OK
to close the message.
To enable speech or symbols in ChatEditor, simply connect a USB cable
between your computer and your device.
Note:
If a message prompts you to allow access, you must tap
Allow
to
proceed. For details, see “
Appendix B: Connecting Your Device to a
Test the Editor to verify that speech is working or symbols are
displaying. Then disconnect the cable. Speech and symbols will now be
enabled whenever you use the Editor; you will not need to re-connect
the cable.
Important!
If ChatEditor will not connect to your computer or if no
voices are available, contact Saltillo technical support at 1-800-382-
Opening ChatEditor
To open the Editor for normal use after you have set up a configuration,
choose the ChatEditor shortcut from your computer’s desktop. The
Editor will open on your computer.