NovaChat User’s Guide
148
4.
Set the scan mode to Linear. Choose
Patterns
>
Mode
>
Linear
and
choose
OK
.
5.
Go to your vocabulary and step through each button by pressing the
switch at each, then release the switch when you reach the button
you want to activate.
Using Linear Scan Mode with Two Switches
1.
Verify that Enable Scanning is selected. Choose
Menu
>
Settings
>
Input
>
Scanning
. A checkmark should appear in the Enable
Scanning checkbox.
2.
Turn Auto Scan on or off, whichever is appropriate for the user.
Choose
Switch Access
and select the Auto Scan checkbox to insert
or remove a checkmark.
Note:
When Auto Scan is turned on, scanning will activate without
holding a switch. When Auto Scan is turned off, a switch activation
is required to move the scan through each button, one at a time.
3.
Set the scan mode to Linear. Choose
Patterns
>
Mode
>
Linear
and
choose
OK
.
4.
Go to your vocabulary and choose switch A to step and switch B to
make an activation.
