NovaChat User’s Guide
48
Attaching a Strap with Loops
For hands-free transport, attach a strap to your
device. For convenience, there are four strap
holders on the device—one on each corner or
one set on the handle and another set near the
bottom of the device.
If you received loops with your strap, attach them to the appropriate
holders. Do not attach the strap directly to the plastic case; this may damage
the device.
The loops are a potential choking hazard. Use them with caution.
Straps are potential entanglement or strangulation hazards. Please
consider this prior to placing these items with device users.
Note:
If the strap holders are located on the corners of your device, connect
the loops the same way as shown here.
Step 1:
Feed the end of the loop through
the hole in the case.
Step 2:
Thread the metal ring through the
loop.
Step 3:
Pull the metal ring to tighten the
loop. Repeat steps 1-3 for the other loop.
Step 4:
Clip the strap to the metal rings.
