53
SALICRU
7. DESCRIPTION OF THE CONTROL PANEL.
7.1.
CONTROL PANEL PARTS.
(1)
LED indicators:
(a)
Rectifier input voltage OK (green).
(b)
Equipment on bypass (orange).
(c)
Inverter ON (green).
(d)
Equipment running from batteries -mains failure- (red).
(e)
In case of any alarm of the equipment (red).
(2)
LCD screen.
(3)
Keypad
ENT
«Enter» key. Confirmation of orders, program values (or
other specified functions)
(
)
«Left» key for submenu navigation, or cursor moving.
(
)
«Right» key for submenu navigation, or cursor moving.
(
)
«Up» key for menu navigation, or character modification.
(
)
«Down» key menu navigation, or character modification.
ESC
«Escape» key. Return to main screen, cancel/finish pro-
gramming (or other specified functions).
(1): (a) (b) (c) (d) (e)
(2) (3)
c b a
d e
1
2 3
Fig. 41.
Control panel parts, according to the model
7.2.
BASIC FUNCTIONS OF THE SYNOPTIC KEYPAD.
• Through keys advance
(
)
and return
(
)
, there is access to
all the menus of the LCD panel, being able to move from one to
another.
• Through keys right
(
)
or left
(
)
, there is access to the screens
of all the submenus of the LCD panel, being able to move from
one to another with themselves.
• Key
(ENT)
, has different purposes depending on the menu we
are:
Setting values. Press key
(ENT)
to activate the setting
function, the figures in the screen blink. With keys
(
)
-
(
)
the character to set is selected and with keys
(
)
-
(
)
the
value is selected. To confirm press
(ENT)
. Next field will
blink, to continue doing settings proceed in the same way
or press
(ESC)
to return to no-setting situation.
Validation of orders or commands.
• When pressing key
(ESC)
from any screen of any submenu, it is
gone back to main screen
(Screen 0.0)
, unless we are in any
screen of
«Parameters»
menu and setting any of them. If so,
the first pulsation of key
(ESC)
will stop blinking the value, and
second one will go back to main screen.
• Notes related with the screen map (see Fig. 42):
Some screens have a certain number of «
–
» characters.
Each one of it, means one character, so the maximum length
of the field will be determined by the quantity of them.
Each screen is labelled with a number located in its right
bottom corner. It is only included as a mere reference for its
next description and explanation.
Note (*1): it means the hidden programming screens through
password (*****) in «
screen 1....
». This safety level avoids
that non-authorised staff can alter or modify any setting
<ENT> TO CONFIRM
<ESC> TO CANCEL
(*1)
screen 1.2
Safety Screen
level numbering
Fig. 42.
Notes related with the screens
7.2.1. Messages menus and classification of the submenus.
• Use
(
)
and
(
)
keys to choose between different menus (0.0,
1.0, …, 7.0).
• Use
(
)
and
(
)
keys to move inside submenu screens.
