Sakai SW800-II, Руководство по ремонту

Страница: 126 / 258

6-030
VIBRATORY DRUM
⑥
Drive the spring pin (7) into the sleeve (6).
Apply gear oil to the inner surface of the sleeve (6) and
the splined portion of the eccentric shaft (4).
Install the sleeve (6) on the eccentric shaft (4).
⑦
Apply a thin coat of gear oil to the surface to which the
vibrator bearing (10) will be press-fitted.
Drive the vibrator bearing (10) into the housing (8).
(NOTICE)
Take care not to damage the bearing when installing
it.
⑧
Install a lifting bolt (M8) on the shaft end of the eccentric
shaft (11).
Apply a thin coat of gear oil to the inner surface of the
vibrator bearing (10) and the bearing mounting surface of
the eccentric shaft (11).
Slowly lower the eccentric shaft (11) with a crane and
install it in the housing (8).
(NOTICE)
Install the eccentric shaft taking care not to tilt the
vibrator bearing inner race.
Eccentric shaft (11) : 45 kg (99 lbs.)
•
•
•
•
•
•
•
SW800-06066
10
8
SW800-06067
10
11
8
Lifting bolt
SW800-06065
6
7
4