Sakai SW800-II, Руководство по ремонту

Страница: 136 / 258

6-040
VIBRATORY DRUM
22) Lower the bracket subassembly while keeping it level and
install it on the spigot joint of the housing.
(NOTICE)
Be sure to install the bracket subassembly correctly
in relation to the position of the breather mounting
hole in the housing.
23) Secure the bracket subassembly to the housing with the
sixteen bolts (23) and washers.
Bolts (23) M20×60 : 540 N·m (400 lbf·ft)
Wind seal tape around the threaded portion of the
breather (24).
Install the breather (24).
24) Apply molybdenum-based grease to the splined portion of
the sleeve (42).
Fit the sleeve (42) to the splined shaft on the eccentric
shaft end.
•
•
•
•
SW800-06096
24
23
SW800-06097
42
SW800-06095
Breather
mounting
hole.
Align
with hole.