Sakai SW800-II, Руководство по ремонту

Страница: 96 / 258

6-004
VIBRATORY DRUM
5) Using belts, sling water spray tank and cross member
together on a crane hook.
Slightly lift the crane to apply tension on belts.
6) Remove bolts (4) from left and right sides of frame (four
bolts per side).
7) Lift off entire spray system from frame. (front and rear)
Weight of parts: 270 kg (595 lbs.)
WARNING
The hydraulic oil in the vehicle is hot and compressed
immediately after the vehicle is stopped. Disconnecting
the hydraulic hoses in this condition can cause burns.
Wait for the hydraulic oil to cool down before starting
the work.
8) Disconnection of piping
①
Propulsion motor piping
Remove the hydraulic hose clamp (5).
Disconnect the four hydraulic hoses (6), (7), (8) and (9)
connecting to the propulsion motor.
(NOTICE)
Plug both ends of the disconnected hoses or
implement other actions to prevent entry of foreign
matter.
②
Vibrator motor piping
Remove the hydraulic hose clamp (10).
Disconnect the four hydraulic hoses (11), (12) and (13)
connecting to the vibrator motor.
(NOTICE)
Plug both ends of the disconnected hoses or
implement other actions to prevent entry of foreign
matter.
•
•
•
•
•
•
•
SW800-06004
4
Belt
SW800-06005
5 6 7 8 9
Propulsion motor
SW800-06006
10
11
Vibrator motor
12
13