Sakai SW800-II, Руководство по ремонту

Страница: 98 / 258

6-006
VIBRATORY DRUM
2-2. Installation of Vibratory Drum
1) Install the vibratory drum in the reverse order in which it
was removed.
Tightening torques for the bolts where particular care is
required when installing the vibratory drum.
Bolt (4) M20×80 : 540 N·m (398 lbf·ft)
Cross member
Bolt (14) M22×90 : 685 N·m (506 lbf·ft)
Vibratory drum
2) Upon installing the vibratory drum, pay particular attention
to the following precaution.
CAUTION
If the engine is run at high speed or the cylinder is
operated to full stroke when the engine is started for
the first time after the work is completed, the piston
packing or other items may be damaged by air entering
into the cylinder.
(NOTICE)
Fill the hydraulic oil tank to the specified level to make
up for any oil leakage.
Start the engine and circulate the oil through the
piping. Then check the oil level again, ensuring that
the oil is at the specified level.
•
•
•