Sakai SW800-II, Руководство по ремонту

Страница: 133 / 258

6-037
VIBRATORY DRUM
14) Install lifting bolts (M16) on the axle shaft subassembly.
15) Apply a thin coat of grease to the entire periphery of the
O-ring (40).
Install the O-ring (40) on the axle shaft subassembly.
16) Lift the axle shaft subassembly with a crane and lower it
slowly.
Supporting the eccentric shaft (11) with a pipe or the like,
align the center of the vibrator bearing inner race to that of
the shaft.
(NOTICE)
Install the axle shaft taking care not to tilt the vibrator
bearing.
When installing the axle shaft, take care not to allow
the O-ring to protrude from the fitting groove.
Axle shaft subassembly : 145 kg (320 lbs.)
•
•
•
•
SW800-06087
40
Axle shaft subassembly
SW800-06088
11
Pipe
Axle shaft
subassembly
SW800-06086
Lifting bolt
Axle shaft subassembly