Ryobi P740, Руководство оператора

Страница: 5 / 36

5 — English
SPECIFIC SAFETY RULES

Know your inflator. Read operator’s manual carefully.
Learn its applications and limitations, as well as the spe-
cific potential hazards related to this tool. Following this
rule will reduce the risk of electric shock, fire, or serious
injury.

Risk of Bursting.
Carefully monitor objects during infla-
tion.

To reduce the risk of electric shock, do not expose to
rain. Store indoors.

Inspect unit for cracks, pin holes, or other imperfec-
tions that could cause inflator to become unsafe.
Never cut or drill holes in the inflator.

Make sure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance or
footing and may become damaged.

Use the inflator only for its intended use. Do not alter
or modify the unit from the original design or func-
tion.

Always be aware that misuse and improper handling of
this inflator can cause injury to yourself and others.

Never leave an inflator unattended with the air hose
attached to the item being inflated.

Do not continue to use a inflator or hose that leaks
air or does not function properly.

Always disconnect the air supply and power supply
before making adjustments, servicing a inflator, or
when an inflator is not in use.

Do not attempt to pull or carry the inflator by the
hoses.

Always follow all safety rules recommended by the
manufacturer of your inflator, in addition to all safety
rules for the inflator.
Following this rule will reduce the
risk of serious personal injury.

Do not use inflator as a breathing device.

Never direct a jet of compressed air toward people or
animals. Take care not to blow dust and dirt towards
yourself or others. Following this rule will reduce the risk
of serious injury.

Protect your lungs.
Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.

Do not use this inflator to spray chemicals. Your lungs
can be damaged by inhaling toxic fumes.

Check damaged parts. Before further use of the infla -
tor or air tool, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired
or replaced by an authorized service center.
Follow-
ing this rule will reduce the risk of shock, fire, or serious
injury.

Do not charge battery tool in a damp or wet
location. Following this rule will reduce the risk of electric
shock.

Inspect tool cords periodically and, if damaged, have
repaired at your nearest Authorized Service Center.
Constantly stay aware of cord location.
Following this
rule will reduce the risk of electric shock or fire.

To reduce the risk of over inflation,
use a reliable pres-
sure gauge periodically during inflation. The pressure
guage on the inflator is for reference only and is therefore
not binding for exact values.

Never leave the inflator unattended during inflation.

Never start a vehicle if the inflator’s 12 V adaptor is
plugged into the vehicle’s 12 V receptacle.

Save these instructions.
Refer to them frequently and
use them to instruct others who may use this inflator.
If you loan someone this inflator, loan them these
instructions also to prevent misuse of the product and
possible injury.
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may
contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive
harm.
Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.
CALIFORNIA PROPOSITION 65