RTS KP-12 Скачать руководство пользователя страница 87

Страница: 87 / 106

Configure the RVON-8 using AZedit to contact the RVON-1

17.

Enter the

first number

in the Gateway IP Address.

This activates the first octet of the Gateway IP Address and clears the rest of the address

18.

Tap the

encoder knob

This confirms the first octet in the Gateway IP Address and moves you to the second octet

NOTE

: Press PGM to skip over any octet that does not need modifications.

19.

Repeat steps

and

until the entire Gateway is entered.

20.

Tap the

encoder knob

21.

Press and hold the encoder knob to

exit

the menu.

The changes are now enabled

NOTE

: You can still set the IP Address without being connected to an Ethernet LAN. Once you have entered the IP

information, you will be prompted to perform a

Save Cfg

. The address is saved in the keypanel until the RVON-1 is connected

to an Ethernet LAN.

TOP LEVEL MENU, RVON CONN.

Select an RVON Connection from the Top Level Menu

The RVON Conn. menu is a list of connection offers from other intercoms. This menu allows the keypanel to dynamically
select an intercom and port to which it will connect.

To select the connection offer, do the following:

Using the encoder knob on the KP -812, scroll to

RVON Conn

Tap the encoder knob to select

RVON Conn

The currently selected connection offer appears in the CWW window. If you have not previously selected the connection,
you will see “none”.

Turn the encoder knob to scroll to the connection offer to which you want to connect.

Tap the encoder knob to select the

connection

The connection offer begins to flash indicating that it has been selected

Press and hold the

encoder knob

to exit the menu.

The keypanel will now connect to the select port

Configure the RVON-8 using AZedit to contact the RVON-1

To configure the RVON-1 card, do the following in AZedit:

From the Status menu, select I/O Cards.
The I/O Card Status screen appears showing the types of installed.

Содержание KP-12











































































































Результаты поиска

Содержание KP-12

Отзывы:

RTS KP-12, Инструкция пользователя, Страница: 87 / 106

Результаты поиска

Содержание KP-12

Отзывы: