RTS KP-12, Инструкция пользователя, Страница: 44 / 106

6-8
K P - 3 2 U s e r M a n u a l
2
Tap any keys where you want to add a chime tone. Both LEDs will light red for the selected
keys.
3
Tap CLR to exit.
4
Run Service Menu, Save Cfg, to store Chime settings.
Note
The chime option will continue on a key even if you change the key assignment.
Removing the chime option from a key
Repeat the procedure to add chime, but tap any keys where the LEDs are lit red to turn them off.
Run Save Cfg to store the changes.
Key Option Menu, Key Groups
You can set up a key group, so that when you activate one key (the master key) all keys in the
group will activate. Up to 4 key groups can be set up.
1
Select
Key Groups
, then tap PGM .
2
Group 1
displays. To select a different group, press
⎠⎠
or .
3
Tap PGM .
4
Tap Master
displays. The master key is the key that you will press to activate the group.
5
Tap the intercom key that you want to use as the master. Both LEDs next to the key will light
red.
6
After you select the master key,
Tap Slaves
displays. Slave keys are the keys that will activate
along with the master key.
7
Tap one or more keys to select them as slave keys. Both LEDs will light green for each key that
is selected. You can tap a key again to remove it from the key group.
8
Tap CLR when finished.
9
Activating the master key should now cause it and all slave keys to activate. The LEDs for
each key will activate according to the current key assignment for that key.
10
Run Service Menu, Save Cfg, to store Key Group settings.
Note
Key group settings will continue on keys even if you change the key assignments.
Clearing a key group
1 Select
Key Groups
, then tap PGM .
2
Group 1
displays. To select a different group, press
⎠⎠
or .
3 Tap PGM .
4
Tap Master
displays.
5 Tap the current master key. The LEDs will remain lit red.
6 After you tap the master key,
Tap Slaves
displays.
7 Tap all the keys where the LEDs are lit green. This will turn the LEDs off.
8 Tap CLR when finished.
9 The key group is now cleared.
10 Run Service Menu, Save Cfg, to store the cleared key group setting.