RTS KP-12, Инструкция пользователя, Страница: 26 / 106

4-2
K P - 3 2 U s e r M a n u a l
5
Dial the telephone number. Digits scroll in the display above the TIF key.
6
When the far end answers, you can dial additional digits (to access a mail system or automated
response system, etc.). When finished dialing, momentarily turn off the TIF talk key to end
dialing mode (talk LED turns red).
7
Turn the TIF talk key back on for conversation.
8
To end the call:
1
Turn the TIF talk key off.
2
Tap PHONE CLR .
3
Tap the TIF talk key. The TIF key talk and listen indicators will turn off and the TIF-951
"OFF" LED will activate. The TIF-951 is now ready for another call.
KP9X Redial Sequence
Note
The last dialed phone number is always stored at the TIF and over-writes any previously dialed
phone number. If several people have access to the TIF, redial may not produce the results that
you expect!
1
Tap the PHONE key to activate dialing mode.
2
Tap "up" on the TIF key to activate listen.
3
Tap CLR 0 0 . The last phone number will redial.
4
After the number has dialed, click the PHONE key to end dialing mode.
5
If the far end answers, tap "down" on the TIF key to activate talk.
6
Use the KP9X hang-up sequence when finished with the call.
KP9X Autodial Sequences
Note
Unlike the autodial operations using the KP-32 menu system, which store telephone numbers
locally within the KP-32, the KP9X autodial operations work with telephone numbers that are
stored at the TIF-951. The advantage to saving at the TIF-951 is that many users can access a
common set of stored telephone numbers. A disadvantage is that users can easily over-write
important telephone numbers. Also, telephone numbers at the TIF-951 are stored in volatile
memory and will be lost if the TIF-951 loses power.
Storing an Autodial Number in the TIF-951
1
Tap the PHONE key.
2
Tap the TIF talk key to latch it on.
3
Using the number keys on the keypad, dial the phone number that you want to store. The entire
phone number sequence can have up to 30 digits.
Note
To insert one or more pauses anywhere in the dialing sequence, enter CLR CLR 9 9 for each
pause. A pause may be required, for example, if you need to enter a digit to get an outside line and
your phone system requires a pause before continuing to dial. If you are using credit card dialing,
several pauses may also be required between the phone number and your personal access code.
4 After dialing the telephone number, click CLR PGM , then enter a two-digit number (01, 02,
etc. up to 32) that you will use as the autodial number.
5 After storing the autodial number, hang up using the KP9X hang-up sequence.