RTS KP-12 Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 106

RTS KP-12 Скачать руководство пользователя страница 84

Installation

18

Configure the RVON-1 from the KP-32

To use the RVON-1 with the KP-32, the KP-32 firmware must be at version 2.0.0 or higher. In turn, the firmware requires that
larger flash chips be used as well (see See “Flash Chip replacement part numbers.” on page 14.).

TOP LEVEL MENU, SERVICE, RVON SETUP

Set the IP Address from the Service Level Menu

The RVON-1 card, when shipped has a default IP Address already configured. This must be changed in order for the RVON-1
card to function properly because the pre-configured IP Address may not work with your network.

To set the IP Address, do the following:

1.

On the KP-32, press

Menu

.

The top level menu appears

.

2.

Using the

⎠⎠

, scroll to

Service

.

3.

Press

PGM

.

The Service menu appears

.

4.

Using the

⎠⎠

, scroll to

RVON Setup

.

5.

Press

PGM

.

The IP Address menu item appears

.

6.

Press

PGM

.

The actual IP Address appears

.

7.

Enter the

first number

in the IP Address.

This activates the first octet of the IP Address and clears the rest of the IP Address

.

8.

Press

PGM

.

This confirms the first octet in the IP Address and moves you to the second octet

.

NOTE

: Press

PGM

to skip over any octet that does not need modifications.

9.

Repeat steps

7

and

8

until the entire IP Address is entered.

10.

Press

PGM

.

The Netmask menu item appears

.

NOTE

: Once you have entered the IP Address, you will then enter the Netmask. The Netmask is a string of numbers similar to

an IP Address, except that it masks or screens out the network part of an IP Address so that only the host computer part of the
address remains (for example, 255.255.255.0).

11.

Press

PGM

.

The actual Netmask appears

.

12.

Enter the

first number

in the Netmask.

This activates the first octet of the Netmask and clears the rest of the Netmask

.

13.

Press

PGM

.

This confirms the first octet in the Netmask and moves you to the second octet

.

NOTE

: Press PGM to skip over any octet that does not need modifications.

14.

Repeat steps

13

and

14

until the entire Netmask is entered.

15.

Press

PGM

.

The Gateway IP Address menu item appears

.

NOTE

: Once you have entered the Netmask, you may need to enter the Gateway IP Address. A Gateway is a note (for

example, a computer) on a network that serves as an entrance to another network.

«
...
82
83
84
85
86
...
»

Содержание KP-12











































































































Отзывы:

Нет отзывов