RTS KP-12 Скачать руководство пользователя страница 85

Страница: 85 / 106

Configure the RVON-1 from the KP-32

16.

Press

PGM

The actual Gateway IP Address appears

17.

Enter the

first number

in the Gateway IP Address.

This activates the first octet of the Gateway IP Address and clears the rest of the address

18.

Press

PGM

This confirms the first octet in the Gateway IP Address and moves you to the second octet

NOTE

: Press

PGM

to skip over any octet that does not need modifications.

19.

Repeat steps

and

until the entire Gateway is entered.

20.

Press

PGM

21.

Press

CLR

to exit the menu.

The changes are now enabled

NOTE

: You can still set the IP Address without being connected to an Ethernet LAN. Once you have entered the IP

information you will be prompted to perform a Save Cfg. The address is saved in the keypanel until the RVON-1 is connected
to an Ethernet LAN.

TOP LEVEL MENU, RVON CONN.

Select an RVON Connection from the Top Level Menu

The RVON Conn menu contains a list of connection offers from intercoms. This menu allows the keypanel to dynamically
select an intercom and port to which it will connect.

To select a connection offer, do the following:

On the KP-32, press

Menu

The top level menu appears in the CWW window

Using the

⎠⎠

, scroll to

RVON Conn.

Press

PGM

The currently selected intercom port appears in the CWW window. If you have not previously selected a connection, you
will see “none”.

Using the

⎠⎠

, scroll to the

connection offer

that you want to accept.

Press

PGM

♦

<connection offer> appears. The arrow to the left of the offer designates which connection offer was chosen

Press CLR to exit.

The keypanel will now connect to the selected intercom port.

Содержание KP-12











































































































Результаты поиска

Содержание KP-12

Отзывы:

RTS KP-12, Инструкция пользователя, Страница: 85 / 106

Результаты поиска

Содержание KP-12

Отзывы: