manualshive.com logo in svg

RTS KP-12, Инструкция пользователя, Страница: 54 / 106

Поделиться
Скачать
RTS KP-12 Скачать руководство пользователя страница 54

6-18

K P - 3 2   U s e r   M a n u a l

Service Menu, Reset Cfg

Reset Cfg restores all custom settings to the defaults and erases all stored autodial numbers.

Service Menu, Save Cfg

Save Cfg 

PGM

 saves custom settings that you have made in the Key Option or Service menus. 

made in the After customizing settings in the Key Option and Service menus, run Save Cfg to 
store your custom settings in non-volatile memory. This will assure protection of you settings 
when the keypanel is powered down. To erase all custom settings, run Service Menu, Reset Cfg.

Service Menu, Sidetone

Sidetone

 

PGM

 lets you adjust the level of you own voice heard in the headphones when using a 

headset. Most people prefer some amount of sidetone to overcome the muffled sensation when 
talking, especially when wearing a full-muff headset. The maximum level is 0 dB.

Service Menu, Test Panel

Test Panel 

PGM

 lets you check the operation of all key and displays.

All alpha-numeric displays show a % symbol. Pressing down on any key (except the 

Headset / 

Vol. Sel.

 key) will cause 

OK

 to display. This verifies operation of the key. Tapping up or down on 

the 

Headset / Vol. Sel.

 key will cause the display to cycle through the available selections.

If latching is enabled, tapping up or down on any intercom key, or the 

Call waiting

 key, will 

cause the corresponding red LED to light. This verifies latching operation and also that the each 
red LED is OK. 

Holding any key in the up or down position will cause the corresponding green LED to light. This 
verifies operation of the green LEDs.

Tapping any keypad button (except CLR) will cause the keypad button name to appear in the 

Call 

waiting

 window. This verifies operation of the keypad buttons.

Tap 

CLR

 to quit.

Service Menu, Tone Gen

Tone Gen 

PGM

 turns the KP-32 tone generator on or off. You can use the tone generator to check 

the audio path from the keypanel to the matrix and back.

Tap 

CLR

 to quit.

Note

The microphone is muted when the tone generator is active.

Содержание KP-12











































































































Отзывы:

Нет отзывов