manualshive.com logo in svg

RTS KP-12, Инструкция пользователя, Страница: 15 / 106

Поделиться
Скачать
RTS KP-12 Скачать руководство пользователя страница 15

2-5

Address Setting for ADAM

Each Audio I/O card contains 1 group of 8 intercom ports. Determine the address setting from 
Figure 2.1. To use the table, locate the intercom port number to which the KP-32 will be 
connected. Then, read across to the "Address" column to find the Address number. Set the KP-32 
Address switch to this number. Note: settings 0, and 9 through F are not used.

Connections

EXP. AND LCP Connectors

Connect from the Exp. connector on the back of the KP-32 to the Expansion 1 connector of an 
optional EKP-32 Expansion Panel. Use the interconnect cable supplied with the Expansion Panel. 
The Expansion 2 connector on the Expansion Panel can connect to a second Expansion Panel, but 
no more than 64 intercom keys can be operated per intercom port. 

Each LCP-32/16 adjusts the listen levels for 16 keypanel keys, and you can connect as many 
LCP-32 panels as required to adjust all keys on the KP-32 and on an optional EKP-32 Expansion 
Panel. An interconnect cable is supplied with each LCP-32. Connect the first LCP-32 to the LCP 
connector on the KP-32. Connect the second LCP-32 to the first LCP-32, and so forth. 

Note

When arranging LCP-32 panels in an equipment rack, you should put them directly above or 
below the keys they will be used to adjust. 

Frame Connector

Use either of the Frame connectors (but not both) to connect to an intercom port of the intercom 
system. The intercom port you connect to should agree with the address that you set previously. 
Cable wiring diagrams are shown in Figure 2.2 and Figure 2.3.

Figure 2.2

DE9S Intercom Cable Wiring

Содержание KP-12











































































































Отзывы:

Нет отзывов