manualshive.com logo in svg

RTS KP-12, Инструкция пользователя, Страница: 22 / 106

Поделиться
Скачать
RTS KP-12 Скачать руководство пользователя страница 22

3-4

K P - 3 2   U s e r   M a n u a l

Talk + auto reciprocal 

Listen will always be on, and talk may be turned on or off.

Talk + auto table 

If an IFB talk key has an auto-table listen assignment, talk and listen can be independently 
activated. The listen key listens to whatever is defined as the IFB Listen Source for the IFB that is 
assigned to the talk key.

Note

A full explanation of the auto-table feature is beyond the scope of this manual. For further 
information, search for "IFB" in ADAMedit help, then read the topics "IFB Auto Table 
Description" and "IFB Setup Procedures".

All Call Key 

Activating the key will also activate all keys to the left of it (up to, but not including another all-
call key).

Talk + DIM 

If a point-to-point key has the DIM function as a level 2 talk assignment, activating the key will 
cause the crosspoint levels to diminish for any other intercom ports that are currently listening to 
the same destination and that are in the same DIM table.

Note

A full explanation of DIM tables is beyond the scope of this manual. For further information, 
search for "dim table" in ADAMedit help.

Operation of Intercom Keys with Options

Group Option Keys 

Activating the master key in a key group will activate all keys in that group according to each 
key's individual key assignment. Activating a slave key will not affect any other keys in the 
group.

Solo Key 

Activating a key that has the solo option will cause all other keys to turn off until the solo key is 
again turned off.

Operation of Intercom Talk Keys with the Speaker DIM Setting

Activating any talk key will cause the speaker or headphone volume at this keypanel to diminish 
by the amount specified in the Dim menu item on the Service menu. 

Note

Do not confuse this with the Talk+DIM auto function previously described. Talk+DIM affects the 
speaker or headphones on other keypanels when a particular talk key is activated on this 
keypanel. Speaker DIM affects the speaker or headphone level on this keypanel when any talk 
key on this keypanel is activated.

Operation of Intercom Keys assigned to TIF Ports

If an intercom key is assigned to talk to an intercom port that is designated as a TIF port in 
ADAMedit, placing the key in the talk position will activate the KP-32 dialing menu. See 
"TELEPHONE OPERATION" for further information.

Note

You designate an intercom port as a TIF port by checking the "Port is TIF" check box in 
ADAMedit. (In ADAMedit, click the "KP" button on the toolbar to access Keypanels / Ports 
setup, then select the intercom port where the TIF s connected, then click the "Edit" button, then 

Содержание KP-12











































































































Отзывы:

Нет отзывов