RTS KP-12, Инструкция пользователя, Страница: 43 / 106

6-7
Key Assign Menu, Setup Page
Use this menu item to change the setup page assignments on the KP-32 or EKP-32. One setup
page is used for the top row of keys, and another setup page is used for the bottom row.
1
Press FWD or PGM to select
Setup Page
in the Key Assign menu.
2
Page 1
displays.
3
Press
⎠⎠
o r to select any of the following:
Page 1
: Assign setup page 1 to the KP-32 or EKP-32.
Page 2
: Assign setup page 2 to the KP-32 or EKP-32.
Page 3
: Assign setup page 3 to the KP-32 or EKP-32.
Page 4
: Assign setup page 4 to the KP-32 or EKP-32.
Clear Page
: Clear a page assignment from the KP-32 or EKP-32.
4 Tap PGM .
5
Tap Key
displays. Tap any key in the row where you want to assign the setup page. The key
assignments for that page should appear in the displays.
6 You can press
⎠⎠
o r to select and assign another setup page. Or, tap CLR to exit.
Note
You do not need to run Save Cfg to store changes to setup pages. These are stored in the intercom
system.
KEY OPTION MENU
Key Option Menu, Auto Dial
Use this menu item to store auto dial numbers.
1
Select
Auto Dial
, then tap PGM .
2
Phone#?
displays.
3
Begin tapping number keys. The numbers will scroll in the Call waiting window.
Note
To insert a pause at any time, tap CLR 9 9 . For example, you may have to insert a pause after
dialing 9 to get an outside line.
4 Tap FWD . (Do not tap PGM !)
5
A-Dial #1
displays (store auto dial number 1). To store a different auto dial number, press
⎠⎠
or to select the desired auto dial number.
6 Tap PGM .
7
#XX saved
displays (where XX = the auto dial number you selected).
8 Run Service Menu, Save Cfg, to store auto dial numbers.
Key Option Menu, Chime
You can add a chime tone to any key for incoming call announcement. The chime tone will
activate for about 5 seconds after a call is received.
1
Select
Chime
, then tap PGM .