RTS KP-12, Инструкция пользователя, Страница: 51 / 106

6-15
2
Press
⎠⎠
or if necessary to select
Input
.
3
Tap PGM .
4
Press
⎠⎠
or .to display the GPI input that you want to remove.
5
Tap PGM .
6
Press
⎠⎠
to select
Not Asgnd
.
7
Tap PGM .
8
♦
Not Asgnd
displays. The arrow indicates that "Not Assigned" is the new selection.
9
Tap CLR to exit.
10
Run Service Menu, Save Cfg, to store local GPIO settings.
Adding or Removing a GPI Output Key Assignment
1
Select
Local GPIO
, then tap PGM .
2
Input
displays.
3
Press
⎠⎠
to display
Output
.
4
Tap PGM .
5
GPI Out #1
displays.
6
Press
⎠⎠
or to display a different GPI output.
7
Tap PGM to select a GPI output.
8
Tap Key
displays. Also, if there is a key currently assigned to activate the selected GPI output,
both LEDs for that key will be lit red. If there is no assignment, no LEDs will be lit red.
9
Tap an intercom key to add or remove the GPI output assignment.
10
Tap CLR to exit, or BACK to back up and make more assignments.
11
Run Service Menu, Save Cfg, to store local GPIO settings.
Service Menu, Matrix Out
This menu item allows the user to select between Normal or Hot Mic. In the Normal (defualt)
setting audio from the Mic goes out to the Matrix when the talk key is latched. In the Hot Mic
setting audio from the Mic goes out to the Matrix with out regard to the talk key’s state.
1
Select Matrix Out from the Service Menu, then tap PGM .
2
♦
Normal
displays
3
Press
⎠⎠
to select either
Normal
or
Hot Mic
4
Tap PGM
5
Tap CLR to exit
6
Run Service Menu, Save Cfg, to store Matrix Out settings.
Service Menu, Mic Select
This menu item allows the user to select between the Panel and Headset Mic. In the Normal
(defualt) setting, audio from the Panel Mic used. In the Hdst Only, setting audio from the Headset
Mic is used.This is used to force the use of the headset microphone even when the keypanel’s
speaker is being used.