RSS M-400 Скачать руководство пользователя страница 67

Страница: 67 / 253

Input channel operations

The function buttons have the following operations.

* Available only for the User library.

Access the CHANNEL DISPLAY screen for the desired
channel.

fig.ScrChDisp.eps

Press [F4 (LIBRARY)] to access the CH LIBRARY popup.

fig.ScrChLib.eps

For details on library operations, refer to “Library operations”
(p. 51).

Input channels can be assigned to DCA groups and mute groups.

Assignments to DCA groups and mute groups are made in the
GROUP ASSIGN popup.

fig.ScrChGrpAsgnGuide.eps

Target channel

This indicates the channel that is the target of the GROUP
ASSIGN popup.

DCA group select buttons

Use these to select the DCA group to which the channel will be
assigned.

MUTE group select buttons

Use these to select the MUTE group to which the channel will
be assigned.

The function buttons have the following operations.

[F1 (PRESET)]

Displays the recall-only PRESET library.

[F2 (USER)]

Displays the USER library, which can be re-
called or stored.

[F3 (PREVIEW)]

Previews (auditions) the selected library data.

[F4 (RECALL)]

Recalls the selected library data.

[F5 (STORE)]*

Stores the settings of the current channel into
the selected library data.

[F6 (LOCK)]*

Locks or unlocks the selected library data.

[F7 (NAME EDIT)]* Accesses the NAME EDIT popup, where you

can edit the name of the selected library data.

[F8 (CLOSE)]

Closes the popup.

Accessing the CH LIBRARY popup

Assigning channels to DCA

groups and MUTE groups

GROUP ASSIGN popup

[F8 (CLOSE)]

Closes the popup.

M-400_v15_e.book 67 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды