RSS M-400 Скачать руководство пользователя страница 175

Страница: 175 / 253

175

User settings

You can change the password for ADMIN or USER settings.

If you have specified a password, an ENTER PASSWORD popup
will appear when you switch user settings.

If you don’t specify a password, you won’t need to enter a password
when you switch users.

Editing the password for users other than the current one can be
done only by a user who has ADMIN privileges.

Access the USER screen.

fig.ScrUser.eps

From the user list, select the desired user name.

Press [F8 (CHANGE PASSWORD)].

The CHANGE PASSWORD popup will appear.

fig.ScrUserPasswdChgGuide.eps

Applicable user indication

This indicates the user name to which the CHANGE
PASSWORD popup applies.

PASSWORD entry field

Specify the password in this field.

Use the left/right cursor buttons to move the cursor, and use
the value dial to change the character at the cursor position.

The characters at other than the cursor position are displayed as
“*.”

C. CONFIRM field

This field is used to confirm the entry in the PASSWORD field.
Enter the same password as you did in the PASSWORD field.

If the contents entered in the PASSWORD field and the
CONFIRM field do not match, the following error message will
appear.

fig.ScrUserPwdMatchErr.eps

In the CHANGE PASSWORD popup, the function buttons perform
the following operations.

Enter the desired password in password entry fields 1
and 2.

If you don’t want to specify a password, press [F5 (CLEAR
Password)].

Press [F8 (OK)] to finalize the password you specified and
close the popup.

If you press [F7 (CANCEL)], the password edit will be cancelled
and the popup will close.

Changing the password of user

settings

A B C

[F1 (A/a)]

Changes the letter at the cursor loca-
tion between uppercase and lower-
case. If the character is not a letter, it
will be replaced by the letter “A.”

[F2 (NUM)]

Changes the character at the cursor
location to “0.”

[F3 (DELETE)]

Deletes the character at the cursor lo-
cation. The characters to the right of
the cursor location will be moved to-
ward the left.

[F5 (CLEAR Password)]

Clears the password.

[F7 (CANCEL)]

Cancels password entry and closes
the popup.

[F8 (OK)]

Finalizes password entry and closes
the popup.

M-400_v15_e.book 175 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды