RSS M-400 Скачать руководство пользователя страница 179

Страница: 179 / 253

179

User settings

Accessing the USER PREFERENCE
popup

Access the USER screen.

fig.ScrUser.eps

From the user list, select the desired user.

Press [F6 (USER LEVEL)].

fig.ScrUserFader.eps

The USER PREFERENCE popup will appear.

Editing the user fader assignments

Access the USER PREFERENCE popup.

fig.ScrUserFader.eps

Press [F1 (USER FADER)] to access the USER FADER tab.

Move the cursor to the desired user fader assignment, and
press [F5 (EDIT)].

fig.ScrUserFdrAsgn.eps

The USER FADER ASSIGN popup will appear.

Applicable user fader

This indicates the user fader to which the USER FADER
ASSIGN setting applies.

Current assignment

This indicates the channel that is currently assigned to the user
fader.

Assignment channel select buttons

Here you can select the channel that will be assigned to the user
fader. The selected channel will be assigned to the user fader.

In the USER FADER ASSIGN popup, the function buttons
perform the following operations.

Use [F1 (CH 1–24)], [F2 (CH 25–48)], [F3 (AUX/MATRIX)], or
[F4 (DCA)] to access the tab that contains the desired
channel.

Move the cursor to the desired channel, and press [ENTER]
to select it.

Press [F8 (CLOSE)] to finalize the changes and close the
USER FADER ASSIGN popup.

Press [F8 (OK)] to finalize the changes and close the USER
PREFERENCE popup.

If you press [F7 (CANCEL)], the changes will be cancelled and
the USER PREFERENCE popup will close.

As an alternative to pressing [F5 (EDIT)] in step 3, you can use
the value dial to edit the user fader assignment.

[F1 (CH 1–24)]

Displays CH1–CH24 as the assignment
channel select buttons.

[F2 (CH 25–48)]

Displays CH25–CH48 as the assignment
channel select buttons.

[F3 (AUX/MA-
TRIX)]

Displays AUX1–AUX16, MATRIX1–
MATRIX8 as the assignment channel se-
lect buttons.

[F4 (DCA)]

Displays DCA1–DCA8 as the assignment
channel select buttons.

[F8 (CLOSE)]

Confirms the changes and closes the pop-
up.

M-400_v15_e.book 179 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды