RSS M-400 Скачать руководство пользователя страница 112

Страница: 112 / 253

112

AUX send/MATRIX send

fig.PopAuxSends.eps

You can use the tabs in the AUX SENDS popup to switch between
two display pages: sends to AUX1–AUX8 (SENDS 1-8) or sends to
AUX9–AUX16 (SENDS 9-16).

•

AUX sends 1–8, AUX sends 9–16

These adjust the sends from the CH to AUX. The AUX send
area is structured as follows.

fig.PopAuxSendFieldGuide.eps

AUX number and name

This indicates the AUX channel number and name.

Send level bar

This adjusts the send level to AUX in a range of -Inf dB–+10.0
dB.

The color of the send level bar indicates the send point or the
status of the send switch, as follows.

ON button

This turns the send switch on/off. The send switch turns the
signal from the channel to AUX on/off.

send point select buttons

These select the point from which the CH signal is sent to AUX,
from the following choices.

AUX LINK switch

This turns linking of adjacent odd-numbered/even-numbered
AUX channels on/off. If this is on, the adjacent AUX channels
will be linked.

If AUX is stereo-linked, the following parameters will be shown
for the odd-numbered AUX send.

fig.PopAuxSendField2Guide.eps

AUX pan slider

This adjusts the left/right panning of the signal sent to the
stereo-linked AUX channels in a range of L63–R63.

PAN LINK button (input channels only)

This turns the PAN LINK switch on/off. If PAN LINK is on, the
pan from the channel to MAIN L/R will be linked with the pan
from the channel to the stereo-linked AUX channels.

In the AUX SENDS popup, the function buttons perform the
following operations.

In the fader module section, press a [SEL] button to select
the desired channel.

In the AUX SENDS area of the CHANNEL EDIT section,
press [DISP].

fig.PopAuxSends.eps

The AUX SENDS popup will appear.

AUX SENDS popup

Color of the
send level bar

Status

Blue

PRE EQ or PRE FADER send point

Green

POST FADER send point

Gray

Send switch is off

PRE EQ

Send from the pre-EQ point.

PRE FD

Send from the pre-fader point.

POST FD

Send from the post-fader point

Button

Function

[F1 (SENDS 1-8)]

Displays the sends to AUX1–AUX8.

[F2 (SENDS 9-16)]

Displays the sends to AUX9–AUX16.

[F3 (ALL ON)

Turns on all send switches for each send
field.

[F4 (ALL OFF)

Turns off all send switches for each send
field.

[F5 (UNITY)

Sets the send level to 0.0 dB for the send field
at the cursor location.

[F8 (CLOSE)]

Closes the popup.

Accessing the AUX SENDS popup

M-400_v15_e.book 112 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды