RSS M-400, Руководство пользователя

Страница: 241 / 253

241
Appendix
Appendix
fig.AlgoDualGEQ.eps
This is a dual-mono 31-band GEQ. A delay is provided after the GEQ.
GEQ A/B
Delay A/B
GEQ
Dual GEQ
Parameter (name) Setting Explanation
ATT (Attenuator) -42.0–+15.0 dB Attenuator for the GEQ
20 Hz Gain–20 kHz Gain -15.0–+15.0 dB Gain of each band
Parameter (name) Setting Explanation
DELAY UNIT msec, Meter, Feet,
Frame (24, 25, 29.97,
30), Note Specifies the units for delay
DELAY SW (Delay switch) OFF, ON Turns the delay on/off
TIME 0–1350 ms Time from the original sound until when the delay is heard
FB (Feedback) 0–100 Amount of delayed sound returned to the input of the delay
LFD GAIN (LF damp gain) -36.0–0.0 dB Low-frequency attenuation of the delay sound
LFD FREQ (LF damp frequency) 20 Hz–2.00 kHz Frequency at which the low-frequency region of the delay sound begins to
be attenuated
HFD GAIN (HF damp gain) -36.0–0.0 dB High-frequency attenuation of the delay sound
HFD FREQ (HF damp frequency) 200 Hz–20.00 kHz Frequency at which the high-frequency region of the delay sound begins to
be attenuated
WET POSITION PRE DAMP Takes the wet sound from before the damp filter
POST DAMP Takes the wet sound from after the damp filter
WET (Wet level) -INF–+6.0 dB Level of the delay sound
DRY (Dry level) -INF–+6.0 dB Level of the original sound
Input A
Delay
Output A DRY
DRY
31 Band GEQ
FB
DPF
PRE DPF
WET POSITION
WET POSITION
POST DPF
Input B
Delay
Output B
31 Band GEQ
FB
DPF
PRE DPF
POST DPF
M-400_v15_e.book 241 ページ ２００８年６月２０日 金曜日 午後４時５分