RSS M-400, Руководство пользователя

Страница: 142 / 253

142
DCA groups
DCA groups
The DCA GROUP ASSIGN popup is used to assign a channel to a
DCA group.
You can also use the GROUP ASSIGN popup of the CHANNEL
DISPLAY screen to assign a channel to a DCA group. For
details, refer to “Assigning channels to DCA groups and MUTE
groups” (p. 67).
fig.ScrDCAGroupAssignGuide.eps
1.
Target DCA group indication
This indicates the DCA group to which the settings in the DCA
GROUP ASSIGN popup will apply.
2.
Channel select buttons
Here you can select the channels that will be assigned to the
DCA group.
In the DCA GROUP ASSIGN screen, the function buttons perform
the following operations.
1.
In the GROUP section, press [DCA] to access the DCA
GROUP screen.
fig.ScrDCAGroup.eps
2.
Move the cursor to the DCA group fader of the desired DCA
group, and press [F8 (ASSIGN)].
fig.ScrDCAGroupAssign.eps
The DCA GROUP ASSIGN popup will appear.
1.
Access the DCA GROUP ASSIGN popup for the desired
DCA group.
fig.ScrDCAGroupAssign.eps
2.
Verify that the target DCA group is correct.
3.
Move the cursor to the desired channel select button, and
press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
When the DCA GROUP ASSIGN popup is displayed, you can
press a top panel [SEL] to turn on/off the corresponding
channel’s assignment to the DCA group.
Assigning a channel to a
DCA group
DCA GROUP ASSIGN popup
[F1 (CH 1–24)] Displays CH1–CH24 as the channel select
buttons.
[F2 (CH 25–48)] Displays CH25–CH48 as the channel se-
lect buttons.
[F3 (AUX/MAIN/
MATRIX)] Displays AUX1–AUX16, MATRIX1–
MATRIX8 and MAIN L/R as the channel
select buttons.
[F8 (CLOSE)] Closes the popup.
1 2
Accessing the DCA GROUP ASSIGN
popup
Assigning a channel to a DCA
group
M-400_v15_e.book 142 ページ ２００８年６月２０日 金曜日 午後４時５分