RSS M-400 Скачать руководство пользователя страница 109

Страница: 109 / 253

109

Four-band EQ

16.

GAIN knob (LO)

17.

GAIN knob (LO-MID)

18.

GAIN knob (HI-MID)

19.

GAIN knob (HI)

These adjust the gain of the LO, LO-MID, HI-MID, and HI
bands in a range of -15.0 dB–+15.0 dB.

Noise may occur when you operate the filter or four-band EQ,
but this is not a malfunction.

In the EQUALIZER popup, the function buttons perform the
following operations.

* CH1 - CH48 only

In the fader module section, press a [SEL] button to select
the desired channel.

In the EQUALIZER area of the CHANNEL EDIT section,
press [DISP].

fig.PopEQ.eps

The EQUALIZER popup will appear.

You can recall four-band EQ and filter settings from the library, or
store the current four-band EQ and filter settings to the library.

The EQ LIBRARY popup is used to perform EQ library operations.

EQ LIBRARY popup

fig.PopEQLibGuide.eps

Channel indication

This indicates the channel to which the EQ LIBRARY popup
applies.

Library data list

This is a list of the library data.

Recall parameter select buttons

These select the section that will be recalled.

If you’re recalling to the MAIN L/R channels or AUX channels,
filter data will not be recalled.

In the EQ LIBRARY popup, the function buttons perform the
following operations.

* Available only for the User library.

[F1 (FILTER ON)]*

Turns the filter on/off.

[F2 (EQ ON)]

Turns the four-band EQ on/off.

[F4 (LIBRARY)

Accesses the EQ LIBRARY popup.

p. 109

[F5 (PEAK CLEAR)]

Clears the level meter’s peak hold
or over indication.

[F6 (FLAT)]

Sets the four-band EQ to flat re-
sponse.

p. 110

[F8 (CLOSE)]

Closes the popup.

Accessing the EQUALIZER popup

Using the EQ library

[F1 (PRESET)]

Displays the recall-only PRESET library.

[F2 (USER)]

Displays the USER library, which lets you
recall or store data.

[F3 (PREVIEW)]

Previews (auditions) the selected library
data.

[F4 (RECALL)]

Recalls the selected library data.

[F5 (STORE)]*

Stores settings to the selected library data.

[F6 (LOCK)]*

Locks the selected library data.

[F7 (NAME EDIT)]*

Accesses the NAME EDIT popup for edit-
ing the name of the selected user library
data.

[F8 (CLOSE)]

Closes the popup.

M-400_v15_e.book 109 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды