RSS M-400, Руководство пользователя

Страница: 229 / 253

229
Appendix
Appendix
fig.AlgoDualDelay.eps
This is a dual-mono delay.
Delay A/B
Delay
DELAY x2
Parameter (name) Setting Explanation
DELAY UNIT msec, Meter, Feet,
Frame (24, 25,
29.97, 30), Note Specifies the units for delay
TIME 0.0–1350 ms Time between the original sound and when the delay is heard
FB (Feedback) 0–100 Amount of delayed sound returned to the input of the delay
LO FREQ DAMP GAIN -36.0–0.0 dB Low-frequency attenuation of the delay sound
LO FREQ DAMP FREQ 20Hz–2.00 kHz Frequency at which the low-frequency region of the delay sound begins to be at-
tenuated
HI FREQ DAMP GAIN -36.0–0.0 dB High-frequency attenuation of the delay sound
HI FREQ DAMP FREQ 200 Hz–20.00 kHz Frequency at which the high-frequency region of the delay sound begins to be
attenuated
WET POSITION PRE DAMP Takes the wet sound from before the damp filter
POST DAMP Takes the wet sound from after the damp filter
WET (Wet level) -INF–+6.0 dB Level of the delay sound
DRY (Dry level) -INF–+6.0 dB Level of the original sound
Input A
Delay
Output A
DRY
FB
DPF
PRE DPF
WET POSITION
WET POSITION
POST DPF
Input B
Delay
Output B
DRY
FB
DPF
PRE DPF
POST DPF
In a delay processor, “feedback” refers to returning the delayed sound back to the input of the delay. The
feedback level specifies the amount of sound that is returned. Increasing this setting will increase the number
of delay repetitions.
M-400_v15_e.book 229 ページ ２００８年６月２０日 金曜日 午後４時５分