rotork Insight 2 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 94

background image

25

5.7.1 Event Log

5.7.2 Dwell Log

5.7.3 Torque/Thrust Logs

5.7.4 Movement Log

5.1 CVQ/CVL Device Information

Please note that CVA actuators should be configured using dedicated Enlight support software. This is
available to download free of charge from

www.rotork.com

.

5.1.1 Valve Tag

This is a user defined name for the actuator consisting of up to 32 alpha-numeric or symbolic characters.
It is normally used by operators to specify a unique tag based on location or a description of the
actuator. This setting is linked directly to the MOVTag in the CVA Valve Setup Menu (See Section 5.2.2).

5.1.2 CVA/CVQ Type

This displays the size of the actuator, along with any options fitted. Rotork Service Engineer use only.

5.1.3 CVA Main PCB Software Version

Shows the current Main PCB software version in the actuator. Rotork Service Engineer use only.

5.1.4 Manufacturing Data

Shows the manufacturing data for the actuator. Rotork Service Engineer use only.

5.1.5 Service Notes

This is where service notes can be entered and stored for future reference. This field accepts up to 64
characters. Rotork Service Engineer use only.

5.1.6 Date of Manufacture

Shows the date of manufacture in the format YYYY/MM/DD. Rotork Service Engineer use only.

5.1.7 CVA Hardware

Shows the current CVA Hardware Number. Rotork Service Engineer use only.

5.1.8 Main Controller Serial No.

This is where the Main Controller serial number can be entered and viewed. Rotork Service Engineer use
only.

5.1.9 UPS Controller Serial No.

This is where the UPS Controller serial number can be entered and viewed. Rotork Service Engineer use
only.

5.1.10 Position Sensor Serial No.

This is where the Position Sensor serial number can be entered and viewed. Rotork Service Engineer use
only.

5.1.11 Motor Sensor Serial No.

This is where the Motor Sensor serial number can be entered and viewed. Rotork Service Engineer use
only.

«
...
23
24
25
26
27
...
»

Содержание Insight 2































































































Отзывы:

Нет отзывов

Похожие инструкции для Insight 2

Бренд: Raven Страницы: 27

Бренд: Raven Страницы: 79

Бренд: Raven Страницы: 88

Бренд: Tacx Страницы: 2

Бренд: C.E. Nierhoff & Co Страницы: 7

Бренд: Bard Страницы: 144

Бренд: GALBIATI Страницы: 8

Бренд: Vahva Jussi Страницы: 9

Бренд: Nel-Tech Labs Страницы: 8

Бренд: Safety 1st Страницы: 4

Бренд: Safety Engineering Страницы: 5

Бренд: Yamaha Страницы: 45

Бренд: NAMYSLO Страницы: 13

Бренд: ASIA TECHNOLOGY Страницы: 38

MERLIN N Series

Бренд: Meheen Страницы: 24

Бренд: Williams Sound Страницы: 32

Бренд: Perun Airsoft Страницы: 10

Бренд: FEDERAL PACIFIC Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды