manualshive.com logo in svg

Rosemount 3051S Series, Справочное руководство

Серия продукции Rosemount 3051S - это надежные и высокоточные датчики давления для широкого спектра применений. Для получения дополнительной информации по использованию устройства рекомендуется загрузить бесплатный Руководство по эксплуатации с официального сайта производителя. manualshive.com - ваш источник необходимых инструкций.

Поделиться
Скачать
background image

Product Certifications

September 2017

Reference Manual 

00809-0100-4803, Rev GA

159

Product Certifications

Special Conditions for Safe Use (X):

1. If the equipment is fitted with the optional 90 V transient 

suppressor, it is incapable of withstanding the 500 V isolation 
from earth test and this must be taken into account during 
installation.

2. For processes with temperatures above 135 °C, the user must 

assess whether the SuperModule temperature class is 
suitable for such applications, because in this situation there 
is a risk of the SuperModule temperature being above T4. 

B.9  China

E3

China Flameproof and Dust Ignition-proof
Certificate: 3051SMV: GYJ14.1039X 

[Mfg USA, China, Singapore]

3051SFx: GYJ11.1466X 

[Mfg USA, China, Singapore]

Standards: 3051SMV: GB3836.1-2010, GB3836.2-2010, 

GB3836.20-2010

3051SFx: GB3836.1-2010, 

GB3836.2-2010, 

GB3836.20-2010, GB12476.1-2013, 
GB12476.5-2013

Markings:  3051SMV: Ex d IIC T6/T5 Ga/Gb

3051SFx:   Ex d IIC T4…T6 Ga/Gb; Ex tD A20 T

A

 

105 °C T

500

95 °C; IP66

Special Conditions for Safe Use (X):

1. Symbol “X” is used to denote specific conditions of use: For 

information on the dimensions of the flameproof joints the 
manufacturer shall be contacted.

2. The relationship between T code and ambient temperature 

range for the Rosemount 3051SMV are as follows:

3. The relationship between T code and ambient temperature 

range for the Rosemount 3051SFx are as follows:

4. The earth connection facility in the enclosure should be 

connected reliably.

5. During installation, use and maintenance of the product in 

explosive atmosphere, observe the warning “Do not open 
cover when circuit is alive”. During installation, use, and 
maintenance in explosive dust atmosphere, observe the 
warning “Do not open when an explosive dust atmosphere is 
present”.

6. During installation there should be no mixture harmful to the 

housing.

7. During installation, use and maintenance in explosive dust 

atmosphere, product enclosure should be cleaned to avoid 
dust accumulation, but compressed air should not be used.

8. During installation in a hazardous location, cable glands and 

blanking plugs certified by state appointed inspection bodies 
with Ex d II C Gb or Ex d IIC Gb DIP A20 [Flowmeters] IP66 
type of protection should be used. Redundant cable entries 
should be blocked with blanking plugs.

9. End users are not permitted to change any components, but 

to contact the manufacturer to avoid damage to the 
product.

10. Maintenance should be done when no explosive gas and dust 

atmosphere is present.

11. During installation, use and maintenance of this product, 

observe following standards:
GB3836.13-1997 “Electrical apparatus for explosive gas 
atmospheres Part 13: Repair and overhaul for apparatus used 
in explosive gas atmospheres” 
GB3836.15-2000 “Electrical apparatus for explosive gas 
atmospheres Part 15: Electrical installations in hazardous 
area (other than mines)”
GB3836.16-2006 “Electrical apparatus for explosive gas 
atmospheres Part 16: Inspection and maintenance of 
electrical installation (other than mines)”
GB50257-1996 “Code for construction and acceptance of 
electric device for explosion atmospheres and fire hazard 
electrical equipment installation engineering”
GB15577-2007 “Safety regulations for dust explosion 
prevention and protection”
GB12476.2-2010 “Electrical apparatus for use in the 
presence of combustible dust”

Parameter

HART

F

OUNDATION

 Fieldbus

Input

RTD

Input

RTD

Voltage U

i

30 V

30 V

30 V

30 V

Current I

i

300 mA

2.31 mA

300 mA

18.24 mA

Power P

i

1 W

17.32 W

1.3 W

137 mW

Capacitance C

i

14.8 nF

0

0

0.8 nF

Inductance L

i

0

0

0

1.33 mH

T code

Ambient temperature range

T6

–50 °C 

~ 

+65 °C

T5

–50 °C 

~ 

+80 °C

T code

Ambient temperature range

T6

–60 °C 

~ 

+70 °C

T4/T5

–60 °C 

~ 

+80 °C

Содержание 3051S Series































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3051S Series

Omega Engineering DFG35 Series User Manual preview
DFG35 Series
Бренд: Omega Engineering Страницы: 22
Velleman EMDIN02 Manual preview
EMDIN02
Бренд: Velleman Страницы: 16
Velleman E305EM5 User Manual preview
E305EM5
Бренд: Velleman Страницы: 4
Velleman DVM1300 Manual preview
DVM1300
Бренд: Velleman Страницы: 8
velocomp PowerPod Tips And Troubleshooting preview
PowerPod
Бренд: velocomp Страницы: 4
Palstar ZM-30 Operating Manual preview
ZM-30
Бренд: Palstar Страницы: 15
Macnaught IM012E Instruction Manual preview
IM012E
Бренд: Macnaught Страницы: 8
Trebs 99732 Manual preview
99732
Бренд: Trebs Страницы: 44
Textron Greenlee CLM-1000 Manual preview
Greenlee CLM-1000
Бренд: Textron Страницы: 36
Teledyne 7300A Operating Instructions Manual preview
7300A
Бренд: Teledyne Страницы: 85
M&C SP180-H Instruction Manual preview
SP180-H
Бренд: M&C Страницы: 18
CONDTROL NEO X1-360 User Manual preview
NEO X1-360
Бренд: CONDTROL Страницы: 27
Tegam R1L-BR1 Instruction Manual preview
R1L-BR1
Бренд: Tegam Страницы: 36
Hanna Instruments HI 96706C Instruction Manual preview
HI 96706C
Бренд: Hanna Instruments Страницы: 24
wtw pH 3310 IDS Operating Manual preview
pH 3310 IDS
Бренд: wtw Страницы: 72
ICP DAS USA iSN-713-MRTU Quick Start preview
iSN-713-MRTU
Бренд: ICP DAS USA Страницы: 4
G4M KB-ii User Manual preview
KB-ii
Бренд: G4M Страницы: 52
Agilent Technologies 83620B 8360 Series Service Note preview
83620B 8360 Series
Бренд: Agilent Technologies Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды