ROPA Tiger 5 Скачать руководство пользователя

Страница: 336 / 530

Maintenance and Service

Diesel engine

336 / 530

Safety cartridge exchange:

The safety cartridge must be exchanged at every fifth maintenance for the main ele-

ment or at the latest after two years for a new safety cartridge. The safety cartridge

may not be cleaned or reused after uninstalling.
– Uninstall the main element as described above.

– Screw the safety cartridge (

) counterclockwise and pull it out.

– Slide in a new safety cartridge and screw it hand tight clockwise (5Nm).

Storage of filter cartridges:

Filter elements must be stored protected against dust and moisture in original packag-

ing, so that they cannot be damaged. Best of all, store filter elements standing up.

We recommend to have at least one replacement filter element in stock for each filter

element in use.

Dust emission valve

Dust emission valves are to a great extent maintenance-free. Possible dust deposits

are easily removed by multiple compression of the rubber valve (

). The valve must be

installed so that it is always free and does not touch anything. A damaged dust emis-

sion valve must be immediately exchanged.

Содержание Tiger 5



















































































































































































































































































































































































































































































































































Результаты поиска

Содержание Tiger 5

Отзывы:

Похожие инструкции для Tiger 5

Бренды по названию

Популярные бренды

ROPA Tiger 5, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание Tiger 5

Отзывы:

Похожие инструкции для Tiger 5

Бренды по названию

Популярные бренды