ROPA Tiger 5, Перевод оригинального руководства по эксплуатации

Страница: 200 / 530

Operation
Chassis
200 / 530
Automatic incline system is turned on, the machine inclines automatically on the swing
axles opposite to the ground profile in horizontal position.
Automatic incline system is turned on, the ground profile can not be further compen-
sated by the incline system. The incline system is at the control end.
The machine is inclined manually to the right or left.
The machine is inclined manually to the right or left. The incline system is at the control
end.
6.11.2 Chassis activation
After starting the machine, the inclination system and height regulation of the chassis
are off. The LED in the key flashes.
The status indicator "Inclination system is off" appears:
after the engine start
if the automatic inclination system is switched off
if in the menu "Special functions", the line "Chassis control" is on NOTACTIVE ( see
page 200 ).
In order to activate chassis by automatic inclination system (optional):
– Drive faster than 5 km/h,
– or press the key .
The machine inclines actively according to the ground profile. The height level of the
chassis regulates itself to the set value.
In order to activate chassis by manual inclination system:
– Drive faster than 5 km/h,
– or press simultaneously the keys and .
The machine aligns itself vertically on the axles. The height level of the chassis regu-
lates itself to the set value.
6.11.3 Menu Chassis control on the R-Touch
The chassis of the machine can be driven to the different heights in the menu "Special
functions", submenu "Chassis control" (e.g. for cleaning of the machine). The chassis
control must be set, e.g. after cleaning, to "Active" again.