Roland LV-290, Руководство пользователя

Страница: 204 / 216

202
8.2.3 Lubrication of the X & Y Rails
In order to keep the motion system running smoothly, the X and Y rails of the motion system will need
lubrication on weekly base. Apply 0.1ml of lubrication syringe in accessory box to the X liner rail of LV-290 on
bi-week base, while apply a small amount of light grade machine oil or PS2 grease to a paper or cotton towel
and apply to the X rail, and Y rails of LV-290 weekly. You can purchase PS2 grease from NSK dealers worldwide.
NOTE
•
Clean and lubricate the X linear rail of LV-290 with 0.1ml grease from syringe every two weeks to
properly maintain the motion system.
•
The lubrication oil for the X linear rail on LV-290 must to be ordered you
’
re your authorized
Roland DG Corporation dealer. Other unknown grease may damage the rail
’
s life time and
performance.
•
Always clean and lubricate the X and Y rails of LV-290 after working with materials that produce
lots of debris (such as wood).
•
Too much oil or PS2 grease applied to the Y rails will accelerate the debris building up.
The X rail of LV-290 has linear bearing design which needs lubrication regularly depending on the job loading,
recommend on bi-weekly base. Follow below procedures.
1. Take out the Grease Syringe from accessory box
2. Remove the lubrication slot plate on the X rails
3. Inject 0.1ml of grease to the injection opening inside the linear bearing, and move the lens carriage to
smooth the grease and movement
4. Repeat the step 3 till the grease is full out of the linear bearing
5. Repeat the step 3 and 4 to the injection opening in opposite side of the linear bearing