Roland LV-290, Руководство пользователя

Страница: 49 / 216

47
4.2 Graphics Software Setup
The LV-290 is compatible with graphics software that can output HPGL commands, such as CorelDRAW, Adobe
Photoshop, AutoCAD, Illustrator etc.
NOTE
Technical support will not be offered, if you experience output problems with non-supported
graphics software.
4.2.1 Recommended Computer Configuration
The LV-290 operates under Windows operating systems and is designed to work on a computer that meets the following
minimum requirements.
Computer Compatibility
•
CPU – Pentium 90 (or equivalent) or greater
•
RAM – 32 MB or higher
•
HDD – 1.2 GB Hard Drive or greater
•
SVGA – 15" Super VGA Monitor

On Board Parallel Mode (Enabled from motherboard’s BIOS)
•
SPP – Preferred Mode
•
ECP – Cable (Less than 1.8 meters)
Software Compatibility
•
The LV-290 printer driver is design for Windows 7, 8.1, 10 or other operating systems developed subsequently.
4.2.2 Installation of the Printer Driver
1) Take out the installation disk from the accessory box and insert to CD-ROM drive of computer. Wait few seconds
for the CD Manager to begin the setup automatically.
2) Click on <LV-290>

<Printer Driver> from the menu of the installation CD.